View DE3S062D_4945953.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

This product complies with the RoHS Directive (EU 2002/95/EC).
DE3S062D
Silicon epitaxial planar type
For surge absorption circuits Features
High electrostatic discharge ESD Contributes to miniaturization of sets, reduction of component count. Eco-friendly Halogen-free package
Package
Code SSMini3-F3-B Name Pin 1: Cathode-1 2: Cathode-2 3: Anode-1, 2
Packaging
Embossed type (Thermo-compression sealing): 3000 pcs / reel (standard)
Absolute Maximum Ratings Ta = 25C
Parameter Total power dissipation Junction temperature Storage temperature
*1
Marking Symbol: 41
Rating 150 30 150 -55 to +150 Unit mW kV C C
1 2
Symbol PT ESD Tj Tstg
Internal Connection
3
Electrostatic discharge *2
Note) *1: PT = 150 mW achieved with a printed circuit board. *2: Test method: IEC61000-4-2 (C = 150 pF, R = 330 W, Contact discharge: 10 times)
Common Electrical Characteristics Ta = 25C3C
Parameter Zener voltage *1, 2 Reverse current Terminal capacitance Temperature coefficient of zener voltage *3 Symbol VZ IR Ct SZ IZ = 1 mA VR = 4 V VR = 0 V, f = 1 MHz IZ = 1 mA 55 2.3 Conditions Min 5.89 Typ Max 6.51 1 Unit V A pF mV/C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. *1: The temperature must be controlled 25C for VZ measurement. VZ value measured at other temperature must be adjusted to VZ (25C) * 2: VZ guaranteed 20 ms after current flow. *3: Tj = 25C to 150C
Publication date: November 2010
Ver. AED
1
This product complies with the RoHS Directive (EU 2002/95/EC).
DE3S062D
DE3S062D_IF-VF
102
DE3S062D_IZ-VZ
DE3S062D_IR-VR
10-5
IF VF
Ta = 25C 102 Ta = 25C
IZ VZ
IR VR
Ta = 25C
Forward current IF (mA)
1
1
10-1
10-1
10-2
10-2
10-3
0
0.4
0.8
1.2
10-3
Reverse current IR (mA)
10
10
Zener current IZ (mA)
10-6
10-7
10-8
5
6
7
10-9
0
1
2
3
4
5
6
Forward voltage VF (V)
DE3S062D_SZ-IZ
Zener voltage VZ (V)
DE3S062D_Ct-VR
Reverse voltage VR (V)
SZ IZ
Ct VR
Temparature coefficient of zener voltage SZ (mV/C)
6
80
Ta = 25C
Terminal capacitance Ct (pF)
4
60
2
40
0
-2
20
-4
0
2
4
6
8
10
0
0
1
2
3
4
5
Zener current IZ (mA)
Reverse voltage VR (V)
2
Ver. AED
This product complies with the RoHS Directive (EU 2002/95/EC).
DE3S062D
SSMini3-F3-B
Unit: mm
1.60 -0.03
+0.05 +0.05
0.26 -0.02 3
0.85 -0.03
1.60 0.05
+0.05
1 (0.50)
2 (0.50) 0.13 -0.02
+0.05
1.00 0.05
(5)
0.375 0.05
(5)
0 to 0.10
0.70 -0.03
+0.05
(0.45)
Ver. AED
3
Request for your special attention and precautions in using the technical information and semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: - Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202

▲Up To Search▲

Price & Availability of DE3S062D

	To Download DE3S062D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .